The Technooptic company
is specialized in the design and manufacturing of optic and opto-mechanical components and systems in small to medium batches. We have all the necessary modern technological equipment available as well as the quality control means to guarantee the high quality of our products.
The main activity of Technooptic Ltd.
is production and trading with optical and mechanical details, especially in designing and trading with components and complete systems - lenses, prisms, objectives, mechanical goods and components, optical systems, etc. connected to the industry consumption and specialized optics, details.
We would like to bring to your attention products of guaranteed high quality and in accordance with the DIN, ISO and MIL standards.
Its our obligation to offer our customers only products of guaranteed quality. After our admission in the EU we equipped a new laboratory for control of the optical components.We have at our disposal microscopes, interferometers, goniometers, autocollimators, etc. manufactured in Germany and Switzerland.
Our components are 100% measured.
On demand, we offer our customers measurement protocols for all optical parameters as well as certificates for the materials. Technooptic Ltd. is dedicated to provide superior optics which meet our customer's requirements and tolerances.
Products
Lenses
Lenses are classified by the curvature of the two optical surfaces. A lens is biconvexif both surfaces are convex, likewise, a lens with two concave surfaces is biconcave. If one of the surfaces is flat, the lens is plano-convex or plano-concave depending on the curvature of the other surface. A lens with one convex and one concave side is convex-concave, and in this case if both curvatures are equal it is a meniscus lens.
Plano-ConvexLenses
have a positive focal length, making them ideal for collecting and focusing light in imaging applications. They are also useful in a variety of applications involving emitters, detectors, lasers, and fiber optics.
Plano-Concave Lens
A Plano-Concave Lens is a divergent or negative lens, thicker at the edge than in the center and flat on one side. It forms a virtual image and is frequently used to extend the effective focal length of a converging lens when they are used as a pair. We suggest that negative focal lengths be stated in order.
Bi -ConvexLenses
have two outward curved surfaces, a positive focal length and are useful for 1:1 imaging and in multi-element systems.
Bi-Concave Lens
A Bi-Concave Lens is a divergent or negative lens, thicker at the edge than in the center. All TechnoOpticLenses are symmetrical having equal radii on both sides. These lenses form a virtual image and are frequently used to extend the effective focal length of a converging lens when they are used as a pair.
Positive or convergent meniscus lens
A positive or convergent meniscus lens is a convex-concave lens thicker at the center than at the edges. They are felt polished and are used universally in the ophthalmic industry where convention dictates that lens power be specified in Diopters.
Negative or divergent meniscus lens
A negative or divergent meniscus lens is also convex-concave, but is thinner at the center than at the edges.
Positive achromatic lenses
These lenses are considerably reduced values of spherical aberration, coma and chromatic aberration. Best used to replace single components where performance must be improved.
Negative achromatic lenses
Typically used to reduce spherical aberration, coma and chromatic aberration.
Optical Design
Optical design is the process of describing the refracting or reflecting elements in an optical system so that it meets a set of performance specifications.
Typically, the performance specifications concern the imaging characteristics of the system, such as the resolution, magnification, numerical aperture, and field of view. Other requirements may include tolerances, size, weight, and cost.
The result of an optical design project is typically a prescription or database that lists the materials and shapes of the optical elements required.
Technooptic provides design services for simple optical components or complex assemblies. We design and build special optical components, devices and systems for a wide variety of applications.
We can help with your optical design problem at any level you may require:
- simple ray tracing of an optical system
- design of a complex lens assembly
- optimization
- aberration correction
- materials selection
- fabrication drawings
Filters
We offer one of the most extensive listings of standardinterference filters in this industry.
Wavelengths range from the ultraviolet through the near infrared and include many of the primary laser, mercury, biomedical and analytical spectral lines.
- Laser Line Filters
- Bandpass Filters
- Laser Rejection Filters
- Color Image Filters
Mechanical Parts
The basic sphere of activity
of the Technooptic Mechanics Division is prototype and small-lot production of mechanical components for precision mechanics, opto-mechanics, laser technology. Long-term experience in the field of CNC processing of small-lot products made of various materials, demanding regarding the tolerances and form, is our competitive advantage. A closed production circle, a wide range of different types of CNC machines and measuring devices as well as experienced staff are a guarantee for permanent quality of products and timely manufacture.
Prisms
- Dove Prisms
- Anamorphic Prisms
- Equilateral prism
- Right Angle Prism
- Roof Prisms
- Penta Prisms
- Roof Penta Prism
- Beamsplitter Penta Prism
- Other
Coatings
AR coatings
are often crucial components in optical systems with multiple lenses or other optics where the maximum possible light energy is needed. AR coatings help to produce brighter images. AR coatings also reduce the intensity of ghost images which are sometimes produced in optical systems by multiple reflecting surfaces.
Microoptic
Technooptic offers its customers components from optical glass and fused silica including.
- Spherical lenses
- Mirrors, windows
- Micro-Prisms (all types)
Optical systems
Cameras
Technooptic offers now design and production of broad variety of Digital Camera Lenses for various applications. Typical applications for our lenses include, but are not limited to, the following:
- Data recording
- CCD imaging
- Document scanning
- Non-contact measurement
- Image digitizing
- X-ray imaging
- High-speed photography
- Pattern recognition
Opticat Sights
- Massive metal construction
- Mechanical and climate effects stability
- Measuring line corrections in horizontal and a vertical plane
- Optical glass
- Lighter cover on the optical details Scale lighting
Objectives
- Micro objectives
- Projection objectives
- Projection Vary objective
- CCTV LENS:
Stereoscopic Sights
Dioptermeter
Оптика и оптични продукти.
is specialized in the design and manufacturing of optic and opto-mechanical components and systems in small to medium batches. We have all the necessary modern technological equipment available as well as the quality control means to guarantee the high quality of our products.
The main activity of Technooptic Ltd.
is production and trading with optical and mechanical details, especially in designing and trading with components and complete systems - lenses, prisms, objectives, mechanical goods and components, optical systems, etc. connected to the industry consumption and specialized optics, details.
We would like to bring to your attention products of guaranteed high quality and in accordance with the DIN, ISO and MIL standards.
Its our obligation to offer our customers only products of guaranteed quality. After our admission in the EU we equipped a new laboratory for control of the optical components.We have at our disposal microscopes, interferometers, goniometers, autocollimators, etc. manufactured in Germany and Switzerland.
Our components are 100% measured.
On demand, we offer our customers measurement protocols for all optical parameters as well as certificates for the materials. Technooptic Ltd. is dedicated to provide superior optics which meet our customer's requirements and tolerances.
Products
Lenses
Lenses are classified by the curvature of the two optical surfaces. A lens is biconvexif both surfaces are convex, likewise, a lens with two concave surfaces is biconcave. If one of the surfaces is flat, the lens is plano-convex or plano-concave depending on the curvature of the other surface. A lens with one convex and one concave side is convex-concave, and in this case if both curvatures are equal it is a meniscus lens.
Plano-ConvexLenses
have a positive focal length, making them ideal for collecting and focusing light in imaging applications. They are also useful in a variety of applications involving emitters, detectors, lasers, and fiber optics.
Plano-Concave Lens
A Plano-Concave Lens is a divergent or negative lens, thicker at the edge than in the center and flat on one side. It forms a virtual image and is frequently used to extend the effective focal length of a converging lens when they are used as a pair. We suggest that negative focal lengths be stated in order.
Bi -ConvexLenses
have two outward curved surfaces, a positive focal length and are useful for 1:1 imaging and in multi-element systems.
Bi-Concave Lens
A Bi-Concave Lens is a divergent or negative lens, thicker at the edge than in the center. All TechnoOpticLenses are symmetrical having equal radii on both sides. These lenses form a virtual image and are frequently used to extend the effective focal length of a converging lens when they are used as a pair.
Positive or convergent meniscus lens
A positive or convergent meniscus lens is a convex-concave lens thicker at the center than at the edges. They are felt polished and are used universally in the ophthalmic industry where convention dictates that lens power be specified in Diopters.
Negative or divergent meniscus lens
A negative or divergent meniscus lens is also convex-concave, but is thinner at the center than at the edges.
Positive achromatic lenses
These lenses are considerably reduced values of spherical aberration, coma and chromatic aberration. Best used to replace single components where performance must be improved.
Negative achromatic lenses
Typically used to reduce spherical aberration, coma and chromatic aberration.
Optical Design
Optical design is the process of describing the refracting or reflecting elements in an optical system so that it meets a set of performance specifications.
Typically, the performance specifications concern the imaging characteristics of the system, such as the resolution, magnification, numerical aperture, and field of view. Other requirements may include tolerances, size, weight, and cost.
The result of an optical design project is typically a prescription or database that lists the materials and shapes of the optical elements required.
Technooptic provides design services for simple optical components or complex assemblies. We design and build special optical components, devices and systems for a wide variety of applications.
We can help with your optical design problem at any level you may require:
- simple ray tracing of an optical system
- design of a complex lens assembly
- optimization
- aberration correction
- materials selection
- fabrication drawings
Filters
We offer one of the most extensive listings of standardinterference filters in this industry.
Wavelengths range from the ultraviolet through the near infrared and include many of the primary laser, mercury, biomedical and analytical spectral lines.
- Laser Line Filters
- Bandpass Filters
- Laser Rejection Filters
- Color Image Filters
Mechanical Parts
The basic sphere of activity
of the Technooptic Mechanics Division is prototype and small-lot production of mechanical components for precision mechanics, opto-mechanics, laser technology. Long-term experience in the field of CNC processing of small-lot products made of various materials, demanding regarding the tolerances and form, is our competitive advantage. A closed production circle, a wide range of different types of CNC machines and measuring devices as well as experienced staff are a guarantee for permanent quality of products and timely manufacture.
Prisms
- Dove Prisms
- Anamorphic Prisms
- Equilateral prism
- Right Angle Prism
- Roof Prisms
- Penta Prisms
- Roof Penta Prism
- Beamsplitter Penta Prism
- Other
Coatings
AR coatings
are often crucial components in optical systems with multiple lenses or other optics where the maximum possible light energy is needed. AR coatings help to produce brighter images. AR coatings also reduce the intensity of ghost images which are sometimes produced in optical systems by multiple reflecting surfaces.
Microoptic
Technooptic offers its customers components from optical glass and fused silica including.
- Spherical lenses
- Mirrors, windows
- Micro-Prisms (all types)
Optical systems
Cameras
Technooptic offers now design and production of broad variety of Digital Camera Lenses for various applications. Typical applications for our lenses include, but are not limited to, the following:
- Data recording
- CCD imaging
- Document scanning
- Non-contact measurement
- Image digitizing
- X-ray imaging
- High-speed photography
- Pattern recognition
Opticat Sights
- Massive metal construction
- Mechanical and climate effects stability
- Measuring line corrections in horizontal and a vertical plane
- Optical glass
- Lighter cover on the optical details Scale lighting
Objectives
- Micro objectives
- Projection objectives
- Projection Vary objective
- CCTV LENS:
Stereoscopic Sights
Dioptermeter
Оптика и оптични продукти.
Профилът на Технооптик ООД е регистриран на адрес в София, ул. "Хайдут Сидер" № 6. Може да сте попаднали тук като сте изписали името с латински букви, като например tehnooptik ood . Можете да се свържете с Технооптик ООД по телефон или на място или да им изпратите запитване от тук. Ако мислите, че профила на Технооптик ООД е неактуален или фалшив, моля свържете се с нас.
